Specifications:

• Assay methods: End Point, Kinetic, Fix time etc.
  
• Principle: Photoelectric colorimetry
  
• Light Source: Halogen lamp 12V/20W
  
• Photometry range: 0~3.2Abs
  
• Resolution: 0.0001Abs
  
• Wavelength: 340nm\405nm\450nm\492nm\510nm\546nm\578nm\630nm\700nm\800nm
  
• Throughput: 200 tests/hour
  
• Reagent tray: 60 reagent positions (include1detergent position,1 dilution position)
  
• Sample tray: 71sample positions,  standard, QC, STAT positions
  
• Reaction tray: 120 reaction cuvettes
  
• Sample volume: 2~100ul, with 0.1ul increment
  
• Reagent volume: R1:10~500uL, R2: 10~500uL,with 0.5uL increment
  
• Minimum reaction volume: 150uL
  
• Maximum reaction time: 10 minutes
  
• Water Consumption: 5L/hour under working status
  
• Clean unit: 8-step auto-washing system with detergent 
  
• Calibration: Calibration reset, select best test point by reaction curve, no need second calibration Line/non-line;multi-standards assay
  
• Control rules: Westgard multi-rule, Cumulative sum check, Twin plot 3 level controls for each ifem, analyxing and printing QC analysis diagram
  
• Temperature control: incubator 37±0.1℃
  
• Power supply: AC 230(1±10%)V, 50/60Hz, 500VA
  
• Ambient: Operating temperature: 10~30℃
  
• Relative humidity: ≤85%
  
• Atmospheric pressure: 86~106kPa

Features

• 24 hour non-stop cooling system to ensure reagent at 2-8℃
  
• Durable ceramic syringes to ensure accuracy & precision 
  
• High accurate optical system
  
• Collision protection in both vertical and horizontal directions, stop & alarm automatically once touching barrier, not affect former tests
  
• Automatic eligible cuvettes detection & selection 
  
• Select best test point by reaction curve, create new factor automatically
  
• Support LIS interface

Accurate Sampling（Sample/Reagent) System

• Collision protection
  
• Liquid level detection
  
• Internal and external probe washing
  
• Probe depth adjustment automatically

High performance mixer design

• Absence of cross contamination
  
• Optimal homogenization in minimum time
  
• Mixing immediately after dispensing of sample and the second reagent

Stable Optical System

• High accurate, close, static state optical system
  
• Spot photometry with high speed digital transmission system
  
• Durable cuvettes
  
• 8-step auto-washing system with detergent and deion-water to ensure cuvettes clean and decrease cross contamination
  
• 120 reaction cuvettes located in a constant temperature incubator
  
• Low consumption, open reagent design

Multi-function sample/reagent tray

• 60 reagent positions, support 25mL, 50 mL reagent bottle type.
  
• 45 sample positions including routine, stat, control and standard
  
• Various primary tubes and special cups can be used
  
• Up to 20 virtual sample tray can be programmed
  
• 24 hours nonstop cooling system with peltier element 

Dynamic and real time display of running status

• Running status of reagent tray, sample tray and reaction tray
  
• Real time monitoring of reagent residual volume
  
• Intelligent carry over setting to adjust test sequence, STAT test priority
  
• Probe depth adjustment automatically
  
• Real time monitoring of reaction curve
  
• Real time diagnosis of system working status